Parker Road Wood Fence Panels & Pickets Wylie, Texas: June 2011

Friday

GONE 19 Pine Fence Panels 6' tall x 8' wide pnels plus extra misc width panels (used)

Pine Fence Panels

6 ft Tall x 8ft wide

19 panels plus extra 6ft tall panels of various widths

all matching from the same fence

GONE

landscape timbers that were the posts for this fence..

CALL 9 7 2 4 4 2 9 2 6 7

GONE Cedar Fence Panels 6 in wide pickets (used)

2 different lots of panels, both from the same yard
over 100ft of panels with one lot being board on board

Custom built on 2x4 runners with both having 6 in wide cedar pickets

Excellent Shape with NO wear on the bottoms

1st lot is
Board on Board
4-6x8 panels
1-6x4 panels
about 52 ft
& a gate

2nd lot is
3-6x10 panels
2-6x8 panels
1-6x4 panels
about 50 ft

GONE

GONE > over 100ft of Pine Privacy Fence Panels includes gates

over 100ft of Pine fence panels

6ft tall x 8ft wide

with a Gate

Great Shape

Thicker Pickets

GONE

Several Fences Came in Last couple of days!! Cedar & 8ft TALL

100ft +/- of 8ft TALL, CEDAR with 5 1/2 inch wide pickets, most panels are 6 ft wide

(per fence company)

GONE

6ft Tall x 8 ft wide. Thick pickets, weathered gray with a bit wear on the some bottoms that I saw, haven't counted the panels, but if I had to guess probably 8-10 panels.

GONE

GONE Cedar Fence 8ft tall .. widths varied

(The Photos I have do not do this fence justice!)

This is a custom Cedar fence with no wear on the bottoms. Because it was setting on a weedeater board the panels don't measure a Full 8ft tall, except for one.

And the widths of these panels vary from 2ft 7 1/2 inches wide to 12 ft wide.

All added up to about 100ft of fence +/-. Pickets are 3 1/2 inches wide and 3/4 inch thick.

Stained on both sides.

AND 18 4x4 fence posts that are 9ft 11 inches Tall.

GONE

GONE Five Pine Panels & a Gate, including all the pickets next to the stack

6ft tall x 8ft wide

5 Pine Panels

& a Gate

includes pickets next to this stack

GONE

GONE Cedar Fence 8ft Tall (used)

Cedar fence panels
custom built on 2x4 runners, pickets are 4 in wide

these are 8ft tall and 8ft WIDE about 72 ft of fence

8 panels of 8' x8' in great shape
1 panel of 8' x8' needs to have most of the pickets nailed back on it's runners
very little wear on bottoms
GONE

GONE Pine Fence Panels 15 6' tall x 8' wide panels plus 2 gates

Pine Fence Panels

14 panels 6' tall x 8' wide panels

1 panel is 6ft tall x 10ft wide

plus 2 gates

stained on both sides

excellent shape

no wear on the bottoms

GONE

GONE over 120 ft of CEDAR Board on Board, with 6 in wide pickets

This was a custom built fence

CEDAR Board on Board,

6.5 ft Tall x 6.5ft wide with 1 panel being 12ft wide

runners are 2x4's

with 6 in wide pickets

& 2 gates

trim board on top

(some wear on bottoms)

GONE

This fence would be ready to install as is OR remove all the pickets, trim the wear off the bottom, and install as a "new" fence, reusing the runners or not, and setting it on a kick board (2x6).. top it with the trim pieces.

This could be a board on board fence again or side by side for more footage. Pressure wash the gray off and you will have a great looking fence that will last for many years.